|
|
||||||
|
||||||
|
Drive stalk insert. This is a steering tube insert. It has been sawed off to have the same angle at both ends. The tip cams were wallowed out to accept a 5/16 carriage bolt. Inside the fork a 1/2" socket wrench was inserted and the nut tightend until the tubes were ovaled. Its a very snug fit, but this will need to be pinned in the final stages of the build.
| Position 4 overall, due to these votes: | ||
| Excellent | : | 4 votes |
| Very Good | : | One vote |
|
||||||
|
|
RSS |